SHOP iSWISS
OXOline 1000 Inserts
oxoline-1000-inserts
AlTi(C)N-based
AlTiN-based
Use with 10xxL tool holders. /Asset/a1350.jpg
Use with 10xxL tool holders. /Asset/a1352.jpg
Use with 10xxL tool holders. /Asset/a1354.jpg
Use with 10xxL tool holders. /Asset/a1356.jpg
Use with 10xxL tool holders.
AlTi(C)N-based
Use with 10xxL tool holders. /Asset/a1360.jpg
Use with 10xxL tool holders. /Asset/a1362.jpg
Use with 10xxL tool holders.
AlTiN-based
Use with 10xxL tool holders.
AlTi(C)N-based
AlTiN-based
AlTiN-based
AlTiN-based
AlTi(C)N-based
AlTiN-based
AlTi(C)N-based
AlTi(C)N-based
AlTi(C)N-based
AlTi(C)N-based
Use with 10xxR tool holders.
AlTi(C)N-based
AlTi(C)N-based
AlTi(C)N-based
AlTi(C)N-based
AlTiN-based
AlTi(C)N-based
1050R-r 12 Degree Cutting Inserts with Radius
(2) R : Right machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1051R-r 15 Degree Cutting Inserts with Chip Breaker and Radius
(9) R : Right machining /Asset/a1342.jpg 1051RP-r 0 Degree Cutting Inserts with Chip Breaker and Radius
(4) R : Right machiningAlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1053R 12 Degree Opposite Cutting Inserts
(12) R : Right machiningUse with 10xxL tool holders. /Asset/a1350.jpg
1053R-r 12 Degree Opposite Cutting Inserts with Radius
R : Right machiningUse with 10xxL tool holders. /Asset/a1352.jpg
1053RX Opposite Cutting Inserts with Chip Roller
(7) R : Right machiningUse with 10xxL tool holders. /Asset/a1354.jpg
1053RP 0 Degree Opposite Cutting Inserts
(8) R : Right machiningUse with 10xxL tool holders. /Asset/a1356.jpg
1053RPX 0 Degree Opposite Cutting Inserts with Chip Roller
(2) R : Right machiningUse with 10xxL tool holders.
AlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1056R Opposite Cutting Inserts with Chip Breaker
(6) R : Right machiningUse with 10xxL tool holders. /Asset/a1360.jpg
1056R-r Opposite Cutting Inserts with Chip Breaker and Radius
(10) R : Right machiningUse with 10xxL tool holders. /Asset/a1362.jpg
1056RP-r 0 Degree Opposite Cutting Inserts with Chip Breaker and Radius
(4) R : Right machiningUse with 10xxL tool holders.
AlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1058R Opposite Cutting Inserts
(2) R : Right machiningUse with 10xxL tool holders.
AlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1068RO Back Turning Inserts
R : Right machiningAlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1063Rb-r Back Turning Inserts with Chip Roller and Radius
(4) R : Right machiningAlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1063RO-r Back Turning Inserts with Chip Roller and Radius
(4) R : Right machiningAlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1065R-r Front Turning Inserts with Chip Breaker and Radius
(2) R : Right machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1067RO Front Turning Inserts
R : Right machiningAlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1081R Threading Inserts with Full Profile
(10) R : Right machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1040L Blank Inserts
L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1080L Threading Inserts with Partial Profile
(2) L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1052L 20 Degree Cutting Inserts
(3) L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1053L 12 Degree Opposite Cutting Inserts
(3) L : Left machiningUse with 10xxR tool holders.
AlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1060LP 0 Degree Back Turning Inserts
(7) L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1061L Back Turning Inserts with Parisian Cut
(6) L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1062LO Back Turning Inserts
(3) L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
1063Lb-r Back Turning Inserts with Chip Roller and Radius
(4) L : Left machiningAlTiN-based
- Universal coating.
- Good oxidation resistance.
- High heat-resistance.
- Suitable for steel and stainless steel.
1065L Front Turning Inserts with Chip Breaker
L : Left machiningAlTi(C)N-based
- Universal coating.
- High hardness.
- Very smooth surface finish.
- Suitable for steel and stainless steel.
